Why I am interested in Light meters?
When I was working in Scotland, I came across photo dynamic therapy (PDT), which uses light sensitive drugs to kill cancer cells. In the entire UK, there are only two PDT centers (afaik), one of which is in Dundee. By visiting the PDT center in Dundee, I realised that after applying the PDT drugs, doctors ask patients to wait in sun light for two hours. There is no particular reason for exactly two hours of exposure to sun light. Therefore, it is not possible to know how much light dose has been received by the patients. To address this problem, PDT center at Dundee measured sunlight across the UK and Ireland and suggested that cheap lux meters can be used to measure the required lux dose. I met with one of the PI and discussed about this in detail.
The problem with cheap light meters:
However, most commercially available cheap lux meters can only give instantaneous measure of light. These are originally developed for photographers to know lighting in their photo and building mangers to know lighting in a room. But PDT application requires the lux values to be logged, aggregated to know whether the required light dose is reached. I think the only way to realise that is through connecting the lux meters to a microcontroller and stream the values to a smartphone. For that I am going to use a cheap lux meter that I can confidently modify after reading this blog post .
What I did:
I ordered the lux meter with a brand name “Ceto”from the same vendor as suggested in the blog post mentioned above. I identified the pins required to tap to get the lux values out. These are the pins on the amplifier. I soldered wires to these pins to read the voltage. So effectively LUX values are converted to voltage values in this lux meter. For example LUX of 290 is converted as 0.288V. I connected these wires to a multimeter to see these voltage values.
In the next step, I will connect the lux meter to a Arduino Uno and Bluetooth so that its possible to record the aggregated lux values overtime time to determine the light dose for PDT treatment. I will write these details in another post.
P.S: It is just one of my hobby project, not related to my research.